By Gene and Katie Hamilton, Tribune Content Agency
Do It Yourself or Not?
9:30 PM EST, December 6, 2013
Energy experts agree that you'll lower your energy bills if you insulate your attic with at least 12 inches of insulation, which is considered the minimum amount to meet today's standards. And it's easy to do: Just lay down batts of poly-wrapped insulation directly over what's already up there. It's not exactly fun to do, but it's one of the best ways you can button up your house to make it tighter and more energy efficient.
An insulation contractor will charge $1,347 to install fiberglass batts in the cavities and space between floor joists in a 1,200-square-foot attic. That includes the labor and material. You can buy the insulation for $980 and do it yourself and pocket a nice saving. Today's batt insulation is greatly improved and wrapped making it much easier (read: not itchy) to install. It's compacted, so it's not as bulky and cumbersome to transport and get up to the attic.
To do the job, use a measuring tape to determine the length of batts needed, and scissors and a straight edge to cut them to size. Wear a respirator, safety goggles, long pants, a long-sleeved shirt and a pair of knee pads to save your shins.
To find more DIY project costs, and to post comments and questions, visit http://www.diyornot.com and http://www.m.diyornot.com on smartphones.
Pro Cost -- DIY Cost -- Pro time -- DIY Time -- DIY Savings -- Percent Saved
$1,347 -- $980 -- 7.4 -- 11.0 -- $367 -- 27 Percent
(c) 2013 GENE AND KATIE HAMILTON, DISTRIBUTED BY TRIBUNE CONTENT AGENCY, LLC.