By Stacey Singer, Palm Beach Post
8:16 PM EDT, March 13, 2013
Two months after hip replacement surgery, Scott Ebert's leg started giving way. His joint began slipping. Razor blades of pain pierced his foot. An inexplicably large bruise grew along his calf. An excruciating burning feeling filled his hip. His ears rang. Doctor after doctor didn't know why. Finally, blood tests showed the metal from Ebert's artificial hip was leaching into his bloodstream.
Six months after it was installed, Ebert's new joint had to be replaced. He's left with chronic pain.
Ebert's Stryker Rejuvenate hip prosthesis was supposed to have been the latest and greatest, a new modular design fitted perfectly to his anatomy, with a choice of stems to be planted into his thigh bone and a choice of necks to support a choice of artificial balls and sockets.
Instead, Stryker's Rejuvenate and ABGII modular systems were recalled in July. They are the latest entries in a gallery of recent hip implant product failures, failures that are shining a light on the need for a system that detects quickly when medical devices go wrong.
The failures appear to have metal and friction in common: metal-on-metal balls and sockets, metal-on-metal stems and necks. Friction appears to cause wear that exposes bare metal to blood and nearby tissues. These traveling metal ions can promote inflammation, tumorlike swellings, and muscle and bone degradation, according to physicians and research reports.
An FDA panel last summer found almost no good reason to use metal-on-metal hip implants after reviewing 17,000 reports of problems in about 500,000 patients with metal balls and sockets.
For a generation of baby boomers growing old and arthritic, total hip replacement is an increasingly common need. More than 1 million of the procedures are performed in the United States each year, and the number is projected to quadruple by 2030, propelled by the graying and fattening of America.
Research shows that for patients with severe hip arthritis, joint replacement can improve quality of life and reduce pain. More than 90 percent of new hip recipients still have their artificial joints after 10 years, the industry reports. But consumers and their doctors alike are still unclear about which materials and surgical techniques are best. Lack of data leaves marketing campaigns and paid surgeon-consultants to tout their ideas.
Revisions can devastate
Dianne Pingel, 66, used to exercise at the YMCA and go for long walks with her husband. Now, she said, she is lucky to walk to the mailbox.
She is recovering from five surgeries related to hip implants in succession. Her left hip was replaced in July 2011 with a Stryker Rejuvenate modular stem. Her right hip was replaced 14 weeks later, in October, also with a Rejuvenate device. The right one has since been removed, but the left hip device remains. It needs to come out.
Removing an existing artificial hip and putting in another one is much more extensive than a first hip replacement. It requires a larger incision, and the sawing away of significantly more bone. Surgeons are forced to pull out a device often firmly cemented into what's left of the patient's femur, attempting to minimize damage to what bone is still there. If the problem joint is surrounded by dead muscle and tissue, that must be removed too.
"It's a lot for a person to go through, "Pingel said.
Growing number of lawsuits
Pingel is the first Rejuvenate patient in the nation to sue Stryker, but she's hardly the last. Pingel's suit is one of nine that have been filed in Bergen County, N.J., where Stryker is based. The company, in its court response, denied the allegations. A company spokeswoman had little to add.
"As a matter of company policy, we don't comment on legal matters," said Stryker's Jeanine Guilfoyle.
Since taking Pingel's case, the attorneys have added 300 clients, Pingel's attorney said. Faced with a barrage of liability lawsuits, Stryker isn't saying what percentage of its joints have failed.
Obstacles to joint registry
Today, the FDA asks companies to track their products and report back. But there is a lag time, and it's unclear what the failure rate is, because the data don't include the total number sold.
A national joint registry could enable doctors to know with certainty that they were matching the right type of prosthesis to the appropriate patient because they could sort data based on patient characteristics. They could then assess product life and revision rates for their type of patient. Regulatory agencies such as the FDA could move quickly when problems arose. And it would cover not just artificial hips, but knees and other joints too.
Medical device makers argue that a voluntary product registry is the right approach. The American Academy of Orthopedic Surgeons has given seed money to launch a nonprofit, the American Joint Replacement Registry.
The voluntary registry's executive director said the goal is to create the largest registry in the world, one similar to Australia's mandatory system. But the project has been thwarted by the lack of a uniform method for hospitals to scan data, such as a bar code. Instead, hospitals must assign a staff person to enter data. In 18 months, 116 hospitals have agreed to participate. The group hopes to attract more than 3,000. In addition, device makers need to develop a plan for adding serial numbers to actual devices without increasing risk of corrosion or metal exposure.
"Everybody says, 'Why haven't we done this in the past?' But really technology is just being brought up to speed where we can do it," said registry Executive Director Jeffrey Knezovich.
Recent prosthetic hip recalls
The FDA encourages patients who have metal-on-metal hip replacements to follow up with their surgeons and seek regular blood tests.
2008: Zimmer Durom Acetabular Component ("Durom Cup") label recall, because of surgical technique instruction issues. On the market with updated instructions, but, according to a company spokesman, no longer for sale in the United States due to lack of demand.
2010: DePuy ASR Total Hip System, because of higher-than-anticipated revision rates according to non-U.S. joint registries. Off the market.
2012: Stryker Rejuvenate and ABGII modular neck-stems because of corrosion. Off the market.
2012: DePuy Orthopaedics unused custom hip and knee replacement implants; a warning letter from the FDA said that they had not been properly approved for use in patients, DePuy disagreed. Off the market.
The problems with Stryker's Rejuvenate and ABGII modular hip joints were revealed first not in the U.S., where at least 20,000 were implanted over almost three years, but in Australia, where far fewer were implanted. Australia picked up the problems first because of its national joint replacement registry.
Copyright © 2014 Chicago Tribune Company, LLC